Hose assembly equipment
Crimping and cutting equipment for hose manufacturing
Hose crimpers, cut-off saws and equipment options for owner-operators, service vehicles and larger workshop operations.
Equipment for manufacturing hydraulic hose assemblies
Hose assembly equipment gives operators and workshops the ability to cut hydraulic hose and crimp suitable hose ends as part of their own hose manufacturing setup.
Integrated Hose & Fittings supplies hose crimpers and cut-off saws for customers ranging from owner-operators setting up mobile service vehicles through to larger businesses manufacturing hose assemblies in their own workshops.
We mainly work with Finpower Australia for hose manufacturing equipment, while access to other suppliers gives us additional brand and entry-level options when a different setup is required.
PRODUCT RANGE
Hose crimpers and cut-off saws
The two main equipment categories supplied by IHF are hydraulic hose crimpers and hose cut-off saws.
Together, they cover two fundamental parts of hydraulic hose assembly manufacturing: preparing the hose to the required length and crimping the hose ends into the finished assembly.
Hydraulic hose crimpers
A hose crimper is used to secure the hose end onto hydraulic hose during assembly manufacturing.
We can supply crimping equipment for different customer setups, from owner-operators looking for equipment suitable for a service vehicle through to businesses requiring a workshop crimper for onsite hose assembly manufacturing.
The appropriate machine depends on the scale and type of hose manufacturing the customer intends to carry out.
Hose cut-off saws
Cut-off saws are used to cut hydraulic hose as part of the assembly manufacturing process.
They are available alongside hose crimpers for customers establishing or adding to their own hose manufacturing capability.
For a mobile operator, the saw and crimper may form part of a compact service-vehicle setup. Larger businesses may instead use the equipment as part of a dedicated workshop.
FINPOWER EQUIPMENT
Finpower hose manufacturing equipment
IHF mainly works with Finpower Australia when supplying hose manufacturing equipment.
The range gives us access to hose crimpers and cut-off saws for customers looking to establish or expand their hose assembly capability.
We are not limited to one equipment brand, however. Our broader supplier access means we can also look at other brands and more entry-level equipment where that is more appropriate to the customer's requirements.
MOBILE SETUPS
Hose equipment for service vehicles
Some owner-operators want the ability to manufacture hydraulic hose assemblies from their own service vehicle.
For these customers, the requirement may centre on a cut-off saw and crimper that can form part of an onsite hose setup.
This gives the operator their own hose manufacturing equipment rather than relying entirely on workshop-based assembly production.
The exact equipment choice depends on the type of setup the operator is building, so we can work through the requirement and available supplier options.
WORKSHOP EQUIPMENT
Crimpers for in-house workshop hose manufacturing
Larger businesses may have a different reason for investing in hose assembly equipment.
Rather than fitting equipment into a mobile vehicle, corporate and industrial customers may want a workshop crimper so their team can manufacture hydraulic hose assemblies onsite.
This can form part of a broader internal hose capability where the business already manages machinery, equipment or ongoing hydraulic hose requirements.
For businesses considering a larger hose-management setup, equipment can also sit alongside hydraulic hose management & preventive maintenance support.
CHOOSING EQUIPMENT
Matching the equipment to how you will use it
The starting point for selecting hose manufacturing equipment is how and where the customer intends to manufacture hose assemblies.
An owner-operator building a service vehicle has different space and operating requirements from a larger business installing a crimper in a workshop.
The volume and type of hose assembly work also influence the equipment requirement. Because IHF has access to many suppliers, we can discuss different equipment levels rather than assuming every customer needs the same setup.
SUPPLIER ACCESS
Equipment options across different brands and levels
While Finpower Australia is IHF's main hose manufacturing equipment supplier, we can access other equipment brands through additional suppliers.
That gives customers options across different levels of hose manufacturing equipment, including more entry-level setups where appropriate.
Our role is to supply equipment around the customer's intended use rather than restrict the enquiry to one machine or brand.
RELATED PRODUCTS
Equipment alongside hose and fittings
A hose manufacturing setup also requires the products used to make the finished assemblies.
IHF supplies hydraulic hose assemblies and a broad range of hydraulic fittings, couplings & adaptors, including hose tails used across hydraulic hose systems.
Customers establishing their own hose manufacturing capability can therefore discuss equipment alongside related hose and fitting requirements through the same business.
RIDGEHAVEN SUPPLY
Hose assembly equipment from our Adelaide base
Integrated Hose & Fittings is based in Ridgehaven, Adelaide, supplying hose manufacturing equipment alongside hydraulic hose, fittings and related products.
Customers can contact us about a mobile service-vehicle setup, a workshop crimper or cut-off saw, or a broader equipment requirement.
Where one supplier is not the right starting point, we can also look at equipment available through other suppliers.
ADELAIDE SUPPORT
Hose manufacturing equipment for Adelaide businesses
We supply hose crimping and cutting equipment for businesses and owner-operators in Adelaide metropolitan areas, with options suited to both mobile and workshop environments.
The focus is on understanding how the equipment will be used, then working through available supplier options for the hose manufacturing setup.
WHY US
Why customers source hose equipment through IHF
IHF works with hydraulic hose assemblies every day, so hose manufacturing equipment sits naturally alongside our broader hose and fittings business.
We mainly source equipment through Finpower Australia but retain access to other suppliers and entry-level options.
That gives customers a local point of contact for discussing the equipment as part of the wider hose manufacturing requirement, including the hose and fittings used with it.
Frequently asked questions about hose assembly equipment
What hose manufacturing equipment does IHF supply?
Integrated Hose & Fittings supplies hydraulic hose crimpers and hose cut-off saws.
These are the main equipment categories we promote for customers manufacturing their own hydraulic hose assemblies, with options available for mobile service vehicles and workshop-based setups.
What brand of hose crimper does IHF supply?
IHF mainly works with Finpower Australia for hose manufacturing equipment, including hose crimpers and cut-off saws.
We also have access to other suppliers and brands, including more entry-level options where those better suit the customer's intended setup.
Can IHF supply equipment for a mobile hose service vehicle?
Yes. We work with owner-operators looking for a hose cut-off saw and crimper that can form part of an onsite service vehicle.
The equipment requirement depends on the intended setup, so customers can contact us to discuss how they plan to manufacture hose assemblies from the vehicle.
Can IHF supply a workshop hose crimper?
Yes. Larger businesses can source workshop crimping equipment through IHF for manufacturing hydraulic hose assemblies onsite.
This type of setup is different from a mobile service vehicle, so the equipment can be considered around the way the workshop intends to manufacture and manage hose assemblies.
Does IHF only supply Finpower hose equipment?
No. Finpower Australia is our main supplier for hose manufacturing equipment, but we also have access to other suppliers and brands.
This includes more entry-level equipment options for customers whose requirements differ from a larger workshop or commercial hose manufacturing setup.
Talk to us about hose assembly equipment
Are you looking for a hose crimper, cut-off saw or equipment for a mobile service vehicle or workshop?
Contact IHF to discuss how you plan to manufacture hose assemblies and the type of equipment setup you need.